|
|
|
| HydroMounting |
|
| Product Description / Application |
The HydroMount has been designed for better damping, shock and vibration control. |
The design consists of a bonded rubber and steel mount with integral buffers to limit movement. Internal chambers contain a high damping fluid to provide damping of low frequency vibrations due to dynamic shock inputs to the vehicle. |
This means the HydroMount is particularly suitable for the cabs on off-highway vehicles working in rough conditions. |
| Specific Applications: |
| • Tracked & Wheeled Excavators |
| • Front End Loaders |
| • Backhoes |
• Forestry Equipment |
|
|
| Features |
The HydroMount combines the benefits of three main features; 1st it’s a load bearing spring with restrained motion capability, 2nd the high damping provides decreased motion near resonance frequencies and 3rd it’s an isolator providing vibration isolation at a specified frequency. |
| The HydroMount is available in three different bolt configuration; 45 mm or 75 mm threaded M16 stud or 30 mm deep M16 hole. For more information, please contact your local TIAVS office. |
|
|
|
Part no. |
Max. Load kg |
Max. Load kg |
read type |
Max. Bolt Torque Nm |
20-01105-01 |
50 |
150 |
45mm long M16 stud |
260 |
20-01496-01 |
50 |
150 |
90mm long M16 stud |
260 |
20-01497-01 |
50 |
150 |
30mm deep M16 hole |
260 |
20-01498-01 |
100 |
200 |
45mm long M16 stud |
260 |
20-01499-01 |
100 |
200 |
90mm long M16 stud |
260 |
20-01500-01 |
100 |
200 |
30mm deep M16 hole |
260 |
20-01104-01 |
150 |
225 |
45mm long M16 stud |
260 |
20-01501-01 |
150 |
225 |
90mm long M16 stud |
260 |
20-01502-01 |
150 |
225 |
30mm deep M16 hole |
260 |
|
