UH
 
Novibra® type UH
Mounting type UH is particularly suitable for the suspension of both mobile and static cabs as well as platforms on agricultural vehicles.
Effectively isolating vibration and noise, the UH-mounting also protects tanks and ancillary equipment against metal fatigue caused by chassis distortion.
Specifi c applications can be found on:
• Tractors • Construction vehicles
• Combine harvester • Forestry vehicles
• Wheel-mounted loaders • Off-road equipment
• Street sweepers • Fork-lift trucks
• Compactors • Excavators
• Lifting cranes  
Features
UH is an anti-vibration mounting designed to accommodate axial static and shock loads in both directions. The dynamic natural frequency is constant irrespective of the static load.
When fi tted with overload/rebound washers, a high strength fail-safe installation is provided. Moreover, it is possible to alter the characteristics of the mounting by providing a dome-shaped washer at the upper rubber section. This will provide impact resistance to defl ection beyond the permissable limit.
Installation reduces build tolerances.
UH is available in 2 standard versions allowing different maximum loads i.e. type UH 50 to a load of 250 kg and type UH 70 to 400 kg per mounting.
Note: Maximum tightening torque of bolts:
• UH 50 80 Nm
• UH 70 120 Nm
Type
Art.No.
Dimensions in mm
Weight
M-Max
K
A
H
C
d
d1
(kg)
(kg)
UH 50 (50° IRH)
1534120
100.5
80.4
37
91
10.5
15
0.41
250
UH 70 (70° IRH)
1660850
100.5
80.4
37
91
10.5
17
0.41
400
   
d2
D
t
 
UH Washer
1660420
17
75
6